51703

From NoxBot the modular PHP IRC bot

Things You'll Need:

Measuring tape

2-inch hole saw. hvac install.

Clear material

Goblet cleaner

4 sheet metal screws

Screw driver

HEPA filter

Pick out a place alongside the side of your heating and air conditioning (HVAC) to set up your germicidal UV lamp. Select a area that may accommodate the mounting plate on the closure of the lamp plus the period regarding the lamp on the inside of the HVAC unit. Use some measuring tape, previously, to measure the period about the lamp.

2 Reduce some 2-inch hole in the side about the heating duct with a hole saw. This allows you to slide the UV mild portion regarding the lamp through the hole and inside the HVAC unit. Before inserting the mild, clean it by way of any clean fabric and glass cleaner to remove fingerprints.

3 Choose the acceptable screwdriver to guarantee the screws.

Secure the mounting plate to the outside about the duct using sheet metal screws. Tighten the screws by way of a screwdriver.

4 Place a HEPA filter inside your HVAC unit. As the UV lamp kills the mold spores, the HEPA filter helps remove it then they cannot continue to pose a health jeopardy.

Tips & Warnings

Several germicidal UV lamps can be installed on the return air side about the furnace or supply air side.

You need to get 24VAC strength on your HVAC system with order to install and make use of some germicidal UV lamp.

Attach the mounting panel with molly bolts instead of sheet metal screws whenever attaching the base to duct board.

Unplug the UV lamp before servicing because the UV light may cause damage to your skin and eyes.